Publisher: Aether StudiosIncluded in this set of 3d Printable Terrain are 21 models of wooden palisades for wilderness forts. Three types of models are included: Wooden, Mossy, and “Trophy” walls mounted with heads. Many thanks to Jake Morley for commissioning this set for construction!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim is helpful for the door models on some printers.
Wooden Palisades
Mossy Palisade
Trophy Models
Mossy Corner Closeup
Trophy Model CloseupPrice: $9.99
Go to Source
