A Whole Bunch of Wet Caverns (Flat Water) [BUNDLE]

Publisher: Fat Dragon GamesExpand your 3D-printable caverns with water in every shape and size!  This bundle includes 9 STL sets with over 150 Wet Caverns 2 models to let you create underground rivers, lakes, and streams spanning multiple vertical levels.
Sample Layout (in addition to the included sets, this layout also includes models from FDG Cavern Starter Set, FDG Cavern Expansion 1, and Prime Caverns):

This special bundle product contains the following titles.

Crossing the ChasmRegular price: $5.99Bundle price: $4.49Format: STL (3D Model)
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps.  Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing?  This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t attack until you’re on the middle step.) As before, the Chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles.  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level. Note that three of the pieces have watery bottoms.  They are intended for use wi…

Wet Caverns 2Regular price: $14.99Bundle price: $11.24Format: STL (3D Model)
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners — based on the latest style of FDG cavern walls, floors, and water.  It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. (If you want the same models with wavy water effect, see the Wet Caverns 2: Wavy Walls set.) Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Suppor…

Wet Caverns 2: ElevationRegular price: $10.99Bundle price: $8.24Format: STL (3D Model)
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout?  This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes.  Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections!  (The sample layout on the cover also uses pieces from Cavern Expansion 1.) (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Elevation) Models in this set include: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different laye…

Wet Caverns 2: Low CorridorsRegular price: $9.99Bundle price: $7.49Format: STL (3D Model)
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between!  Compared to full-height cavern pieces, these lower wet corridors are: Faster to print Easier to see over Easier to place miniatures close to — especially important for tight corridors! These corridors work well with both half-height and full-height caverns; the convenience of using low walls for narrow corridors can’t be overstated. Sample corridor complex: Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Sh…

Wet Caverns 2: Low StreamsRegular price: $10.99Bundle price: $8.24Format: STL (3D Model)
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions from streams near walls to streams across flat ground.  (The add-on Wet Caverns 2: Low Corridors lets your streams flow on through corridors as well!) Why low cavern walls?  These lower stream walls are: Faster to print Easier to see over Easier to place miniatures close to Sample Layout (in addition to this set, includes pieces from Low Walls, Low Corridor…

Wet Caverns 2: Low WallsRegular price: $11.99Bundle price: $8.99Format: STL (3D Model)
This set of 3D-printable STL terrain brings water to your half-height caverns!  Now you can create underground rivers, pools, and lakes up close to lower walls and entrances.  Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts! Why half-height walls?  These lower walls are: Faster to print Easier to see over Easier to place miniatures close to Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) …

Wet Caverns 2: Stream ElevationRegular price: $8.99Bundle price: $6.74Format: STL (3D Model)
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams.  Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams. (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Stream Elevation) Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none …

Wet Caverns 2: StreamsRegular price: $14.99Bundle price: $11.24Format: STL (3D Model)
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between. (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Streams) Sample Layout (along with this set, includes pieces from the FDG Cavern Starter Set, FDG Cavern Expansion 1, and Wet Caverns 2): Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9m…

Wet ChasmRegular price: $10.99Bundle price: $8.26Format: STL (3D Model)
Chasms are great, but how about spicing up a cavern map with an underground river or lake?  This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom.  It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners. As before, the chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles (see the sample rendering on the cover image).  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level.  All the pieces in this set should be clipped in place from the bottom. Important: This set includes smooth water sections, in the style of the current FDG Cavern Expansion 1 …

Total value:
$99.91
Special bundle price:
$74.93
Savings of:
$24.98 (25%)
Price: $99.91
Go to Source