Wet Caverns 2: Wavy Elevation

Publisher: Fat Dragon GamesWet caverns are fun, but what natural cavern features an entirely flat, single-level layout?  This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes.  Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections!  (The sample layout on the cover also uses pieces from Cavern Expansion 1 and Wet Caverns 2: Wavy Ground.)
(For the same models with flat water areas so you can manually add a water effect, see Wet Caverns 2: Elevation)
Models in this set include:

Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: none
Related Sets:
Wet Cavern & Chasm (with wavy-style water)
Wet Caverns 2: Wavy Ground — the latest FDG cavern floors with water alongside
Wet Caverns 2: Wavy Walls — the latest FDG cavern walls, with water alongside on the floor (featuring a waterfall!)
Wet Caverns 2: Wavy Elevation — this set
Wet Caverns 2: Wavy Streams — narrow water edges, to make smaller streams
Wet Caverns 2: Wavy Stream Elevation — higher surfaces near streams
Wet Caverns 2: Wavy Half-Walls — half-height cavern walls with adjacent water floors (coming soon!)
Wavy Chasm — tall chasm walls (that mesh with an upper level tile edge) on wet cavern floors
Dry Cavern & Chasm
FDG Cavern Starter Set — the basic (dry) cavern pieces in this style
Chasm — tall chasm walls (that mesh with an upper level tile edge) on dry cavern floors
Crossing the Chasm — natural rock steps across a chasm, on both wet and dry floors
NOTE: For wet caverns with flat water areas (to add your own water texture by hand), see Wet Caverns 2.Price: $10.99
Go to Source