Crossing the Chasm

Home/Crossing the Chasm
Download From Drive Thru RPG

Crossing the Chasm

Publisher: Fat Dragon GamesThe initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps.  Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing?  This small set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t attack until you’re on the middle step.)
As before, the Chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles.  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level.
Pieces included in this set:

Typical Crossing the Chasm layout, including Chasm pieces and FDG Cavern Starter Set pieces:

Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: none
Related Sets:
Chasm — the original set with chasm-style walls and corners (some included in the sample layout above)
Cavern Starter Set — the cavern models these sets are based on (some included in the sample layout above)
Dragonbite Tile Risers — to support the upper-level tiles in a chasm layout
Price: $3.99
Go to Source

By |2019-07-05T13:53:26+00:00July 5th, 2019|
Go to Top