Chasm 3 – Crow Canyon
Publisher: Fat Dragon GamesThe Chasm series is back with a new update! Rickalias Ebborts took the lead on crafting up these very special remixes for the community. Expand your chasms into cavernous canyons with rock bridges or utilizing some of the Natural Bridge options. You can see all the tiles included in this set below. The large tile on the left is used to support a larger base of tiles above it.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum (there is a fair amount of interior volume which requires some internal support)
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Chasm 1 – The first in the series has the core tiles designed for mapping the chasm in the middle of the Redbrand Hideout map. Designed by Aether Studios’ Aaron Mulder for the Dungeonprint community. This first set was very well received and requests were high for more models.
Chasm 2 – Part of the Remix Request 2 set and pledge reward for Will Walker’s Patreon. It contains the large Chasm 2 set in addition to several requested remixed tiles from the many awesome published sets in the Fat Dragon Games catalogue.
Natural Bridges – From Aether Studios’ Jacob Armour, this Dragonbite and scatter terrain is perfect for the Chasm series.
Fat Dragon Games Cavern Starter Set — walls, floors, and other tiles in the same style
Fat Dragon Games Cavern Expansion 1 – This set has the hole tile shown in the cover.
Go to Source