A Whole Bunch of Wet Caverns (Wavy Water) [BUNDLE]

Publisher: Fat Dragon GamesThis special bundle product contains the following titles.Wavy ChasmRegular price: $10.99Bundle price: $8.24Format: STL (3D Model) Chasms are great, but how about spicing up a cavern map with an underground river or lake?  This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom.  It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles (see the sample rendering on the cover image).  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level.
Important: This set includes rippled water sections, in the style of the legacy FDG Cavern Expansion 1 pieces.  See the Wet C…Wet Caverns 2: Wavy ElevationRegular price: $10.99Bundle price: $8.24Format: STL (3D Model) Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout?  This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes.  Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections!  (The sample layout on the cover also uses pieces from Cavern Expansion 1 and Wet Caverns 2: Wavy Ground.)
(For the same models with flat water areas so you can manually add a water effect, see Wet Caverns 2: Elevation)
Models in this set include:

Recommended Print Settings:

Layer Size: 0.15mm, or 0.1mm for finer detail
Infil…Wet Caverns 2: Wavy GroundRegular price: $5.99Bundle price: $4.49Format: STL (3D Model) Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set.  However, all the water areas are now completely flat.  That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned cavern floor textures.
This set of 3D-printable STL models provides some of those same modern cavern floors with water, except with the wavy water texture carried over from the “legacy” Cavern Expansion 1 designs.  (To be clear, the same models with flat water effect are included in FDG Cavern Expansion 1.)

Recommended Print Settings:

Layer Size: 0…Wet Caverns 2: Wavy Low CorridorsRegular price: $9.99Bundle price: $7.49Format: STL (3D Model) This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between!  These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces.  (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors)
These lower corridors are:

Faster to print
Easier to see over
Easier to place miniatures close to — especially important for tight corridors!

They work well with both half-height and full-height caverns; the convenience of using low walls for narrow corridors can’t be overstated.
Sample Layout (also uses room edges from Wavy Low Walls):

Models included in this set:

Recommended Print Settings:

Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all…Wet Caverns 2: Wavy Low StreamsRegular price: $10.99Bundle price: $8.24Format: STL (3D Model) This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions from streams near walls to streams across flat ground.  (The add-on Wet Caverns 2: Wavy Low Corridors lets your streams flow on through corridors as well!)
These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces.  (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Streams)
Why low …Wet Caverns 2: Wavy Low WallsRegular price: $11.99Bundle price: $8.99Format: STL (3D Model) This set of 3D-printable STL terrain brings water to your half-height caverns!  (Just as Wet Caverns 2: Wavy Walls did for full-height walls.)  Now you can create underground rivers, pools, and lakes up close to low cavern walls and entrances.  These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces.  (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Walls)
These lower walls are:

Faster to print
Easier to see over
Easier to place miniatures close to

You’ll find most of the familiar Wavy Cavern Walls pieces here, including water near walls, entrances, and etc.
Sample Layout (also including some pieces from Wet Caverns 2: Wavy Ground):

Models included in this set:

…Wet Caverns 2: Wavy Stream ElevationRegular price: $8.99Bundle price: $6.74Format: STL (3D Model) This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams.  Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas so you can manually add a water texture, see Wet Caverns 2: Stream Elevation)
Models included in this set:

Recommended Print Settings:

Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozz…Wet Caverns 2: Wavy StreamsRegular price: $14.99Bundle price: $11.24Format: STL (3D Model) This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models with a flat water effect, see Wet Caverns 2: Streams)
Sample Layout (along with this set, includes pieces from the FDG Cavern Starter Set, Wet Caverns 2: Wavy Ground, and Wet Caverns 2: Wavy Walls):

Recommended Print Settings:

Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum
Top/Bottom Lay…Wet Caverns 2: Wavy WallsRegular price: $14.99Bundle price: $11.26Format: STL (3D Model) This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners — based on the latest style of FDG cavern walls and floors.  It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.  However, this set uses the original wavy-style water, as opposed to the latest FDG cavern models that use completely flat water areas.  This set is intended for people who prefer the water texture in their print as opposed to manually adding water effects on top, or who want to match existing prints with the older-style water.  If you want the same models with flat water effect, see the Wet Caverns 2 set.
Models inclu…Total value:$99.91Special bundle price:$74.93Savings of:$24.98 (25%)Price: $99.91
Go to Source

A Whole Bunch of Wet Caverns (Wavy Water) [BUNDLE]

Other Suppliments

Coriolis: The Great Dark Quickstart

Coriolis: The Great Dark Quickstart

Publisher: Free League Publishing Free League’s original sci-fi RPG returns. Join expeditions to faraway stars and delve deep into ancient ruins. The Coriolis:The Great Dark, Quickstart provides you with a

Read More »
Dragon Adjustments

Dragon Adjustments

Publisher: PaizoThese 10 creature adjustments can be applied to any of the 8 true dragons from Monster Core. That means 80 unique dragons are yours to

Read More »

Coriolis: The Great Dark Quickstart

Publisher: Free League Publishing Free League’s original sci-fi RPG returns. Join expeditions to faraway stars and delve deep into ancient ruins. The Coriolis:The Great Dark, Quickstart provides you with a

Read More »

Dragon Adjustments

Publisher: PaizoThese 10 creature adjustments can be applied to any of the 8 true dragons from Monster Core. That means 80 unique dragons are yours to

Read More »